Kingston 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank

£25.36

  • Series: Kingston ValueRAM
  • DDR Type: DDR3
  • Size: 1 x 2GB
  • Individual Module Size: 2GB
  • Total Capacity: 2GB Total
  • Speed: 1333 MHz
  • Compliance: PC3-10600
  • Pins: 240-pin
  • CAS Latency: CL9
  • Data Integrity Check: Non-ECC
  • Voltage: 1.5V
  • Heatsink: No
  • LED Lighting: No
  • Additional Information: Single rank
    On-Die Termination (ODT)
    Unbuffered
  • Package Type: Blister Pack
  • Package Weight: 0.0205 kg
  • Warranty: Lifetime
  • Out of stock

    Category:

    2GB 1Rx8 256M x 64-Bit PC3-10600 CL9 240-Pin DIMM

    DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. 
     
     
    Features
    • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
    • VDDQ = 1.5V (1.425V ~ 1.575V)
    • 667MHz fCK for 1333Mb/sec/pin
    • 8 independent internal bank
    • Programmable CAS Latency: 9, 8, 7, 6
    • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
    • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
    • 8-bit pre-fetch
    • Burst Length: 8 (Interleave without any limit, sequential with
    starting address “000” only), 4 with tCCD = 4 which does not
    allow seamless read or write [either on the fly using A12 or
    MRS]
    • Bi-directional Differential Data Strobe
    • Internal(self) calibration : Internal self calibration through ZQ
    pin (RZQ : 240 ohm ± 1%)
    • On Die Termination using ODT pin
    • Average Refresh Period 7.8us at lower than TCASE 85°C,
    3.9us at 85°C < TCASE < 95°C
    • Asynchronous Reset
    • PCB Height: 0.740” (18.75mm), single sided component
    Weight 0.0205 kg
    Memory Sizes

    Memory Speed

    Scroll to Top

    This website or the third party tools used by this website use cookies that are necessary for the purposes set out in the cookie policy. If you would like to know more or deny consent to all or some cookies, please read the cookie policy.