PRODUCT DESCRIPTION

Arctic P14 14cm Pressure Optimised PWM Case Fan, White, Fluid Dynamic, 200-1700 RPM

  • Type: 14cm Case Fan
  • Fan Connector(s): 4-pin
  • Installation: Screws
  • LED Lighting: No
  • Colour: White
  • LED Lighting: –
  • Weight: 194 g
  • Fan Dimensions: 140 x 140 x 27 mm
  • Fan Controller: PWM
  • Rotation Speed: 200 – 1700 RPM
  • Fan Bearing: Fluid Dynamic Bearing
  • Air Flow: 72.8 CFM
  • Noise level: 0.3 Sone
  • Power: Typical Voltage: 12 V DC
    Starting Voltage: 3.9 V
    Current/ Voltage: 0.12 A / 12 V
  • Additional Features: See Overview
  • Package Type: Retail
  • Package Weight: 0.2400 kg
  • Warranty: 10 Years
  • Pressure-optimised 140 mm Fan with PWM
     

    Optimised for Static Pressure
    During the development of the new P14 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use on heatsinks and radiators.

     

    More Efficient Technology
    The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

     

    Maximum Quietness, Minimum Vibration
    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
     
     
    Extended Life Span
    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.

     

    200 to 1700 RPM Regulated via PWM
    Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
     
     
    High Quality Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

     

    Two Way Installation
    – Push warm air out of the case
     
    – Pull cool air into your case
     
    Weight 0.2400 kg
    Scroll to Top

    This website or the third party tools used by this website use cookies that are necessary for the purposes set out in the cookie policy. If you would like to know more or deny consent to all or some cookies, please read the cookie policy.